Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Florissant?
Panel replacement in Florissant typically costs $250 to $500 per section, depending on panel size, material, and whether the door is a standard single-car or a wide double-car model. A single dented bottom panel is usually on the low end of that range; a full-width section with matching paint or window inserts runs higher. The written estimate we give you after we see the door sets the final price.
That money usually buys more than a cosmetic fix. Water infiltration and rust often start at the panel seams, and a dented or bent panel can throw off the door’s balance and stress the springs and rollers. We treat panel work as part repair, part preservation, which is why we always check the whole door before quoting just the visible damage.
Panel Replacement Cost Breakdown (2026)
What a panel job runs, by section and scope
| Scope of work | Typical estimated range |
|---|---|
| Single steel panel, bottom section | $250 – $340 |
| Single panel, mid or upper section | $280 – $380 |
| Wide panel for a two-car door | $350 – $500 |
| Panel with window insert or decorative trim | $320 – $500 |
| Two or more adjacent panels | $450 – $500+ |
| Panel replacement plus strand/balance check | $250 – $500 (labor included) |
For comparison, here’s how the other garage door jobs we handle stack up on the same visit:
- Garage door repair (general): $150 – $600
- Spring repair (one spring): $180 – $340; a matched pair is usually about twice that
- Cable repair: $130 – $250
- Track realignment: $120 – $240
- Roller replacement: $110 – $220
- Opener repair: $120 – $320
- Opener installation: $250 – $550
- New door installation: $700 – $2,200
The biggest factor pushing a panel job toward the top of the $250 – $500 range is matching. Doors made by Clopay, Amarr, Wayne Dalton, Raynor, LiftMaster, Chamberlain, Genie, and Craftsman all use different panel profiles, and an older door may have a color or texture that’s no longer produced. When an exact match isn’t available, we talk through options: a slightly different color on the bottom panel, a full paint refresh, or budgeting for a full replacement. We’d rather tell you which one you actually need than sell you panels that won’t look right.
What Affects Panel Replacement Pricing in Florissant
Flat panel prices don’t tell the whole story. These are the things that move the number up or down on a real job in Florissant.
- What the panel is made of. Standard 24 or 25-gauge steel is the most common in this area and sits in the middle of the range. Insulated panels and composite or wood-look panels cost more. A plain steel section is the affordable end of the job.
- How many sections are damaged. One panel is straightforward. Two or more adjacent panels often require taking down part of the track to get them in, which adds labor and time. That’s why multiple-panel jobs climb toward $500 and beyond.
- Weather and moisture in the St. Louis area. Florissant sees hot, humid summers and cold winters with freeze and thaw cycles. That cycle drives water into the bottom panel seams and behind the weather seal, which is where rust and delamination show up first. A bottom panel that looks fine one season can start flaking the next. Replacing sections early stops the rot from spreading upward into the panels above.
- The age of the door and parts availability. A door made in the last decade or two usually has a panel still in production. Older doors, or doors with unusual embossing, may need a custom order or a near-match. Custom panels aren’t cheap, and we won’t pretend otherwise.
- Whether balance and hardware need attention. A bent panel often means something hit the door or the springs are working unevenly. Replacing a panel without checking the springs, cables, and hinges can leave you with a door that still drags. We inspect those while we’re there because spring and cable failure is the real safety risk on any garage door, not the dent itself.
- Access and door height. Standard 7-foot doors are the common case. An 8-foot or taller door needs taller panels, and that pushes the price up. A tight garage with a low ceiling or a blocked approach adds careful work to the job.
Florissant’s mix of older brick ranch houses and newer construction means we see a lot of doors that have lasted well but now need a section swapped out. The housing stock is a big part of why panel replacement is such a common job here, not a rare one.
Repair a Panel or Replace the Whole Door?
Replacing one or two panels is usually the right call when the frame, track, and springs are still sound and the damage is cosmetic or confined to one section. A full new door in the $700 – $2,200 range makes more sense when several panels are shot, the opener is on its last legs, or the door is old enough that matching a panel is no longer realistic. We lay out both numbers side by side so you can see what you’re paying for either way. If the damage is to the frame or track rather than the panel itself, take a look at panel replacement or our main repair page to see which fits.
How to Save on Panel Replacement
You don’t have to wait for the door to fall apart to fix a panel, but there are a few honest ways to keep the cost down without cutting corners.
- Fix the bottom panel early. Bottom sections take the most water and road salt from car tires and shoes. Replacing one panel at $250 – $340 today beats replacing three panels plus track work later.
- Repaint instead of replace when the damage is shallow. If the panel is dented but the steel is intact, a matching touch-up or full-door repaint can hide a lot for less than a new section. We’ll tell you when a panel is repairable and when it’s not.
- Bundle the visit. If your rollers, hinges, or weather seal are due, doing that work in the same visit spreads the trip over more value and often saves you the cost of a second call. A roller set typically runs $110 – $220, for example.
- Ask about a partial match. A color that’s close but not exact can save you a custom-order premium, especially on a door that’s shaded or faces the street from a distance. We’ll show you a sample color card so you can judge for yourself.
- Get a free estimate before you commit. A written quote protects you from surprise costs. Call (844) 943-4245 and we’ll give you a straight price, not a range that balloons at the end.
Can You Match My Existing Garage Door Panel?
We can usually match it, and when we can’t, we’ll say so upfront. Our technicians work on the eight major residential brands already in Florissant garages: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That means we’re working on the brand and profile you already own, not trying to steer you toward whatever panel happens to be in stock. If your panel is out of production, we’ll talk through the closest available match, a paint adjustment, or the full-replacement option, whichever actually makes sense for your house.
How Long Does a Panel Replacement Take?
Most single-panel replacements are done in a single visit, often the same day you call. A one-panel job typically runs one to two hours on the door. Two or more panels, a color match order, or a panel combined with spring or track work can take longer, and a custom or out-of-production panel means a short wait for the section to arrive. We’ll give you a realistic window when we quote, not a vague “sometime.” If your door is stuck open or won’t close at all and creates a security or safety problem, call us about emergency service and we’ll get it secured.
What to Check Before You Call About a Panel
A quick look around the door helps us quote faster and helps you understand what you’re seeing.
- Dents and creases: Note which panel number it is, counting from the floor up.
- Rust or bubbling: Look along the bottom edge and the weather seal. Rust at the bottom is the most common panel failure in this climate.
- Water stains or daylight: If you can see light through a gap, the seal or the panel has failed.
- Uneven lifting: A door that lifts crooked or wobbles can point to a bent panel, a bad roller, or a spring issue. Stop using it and let a technician look at the springs and cables, since those parts are under high tension and are genuinely dangerous to touch.
Leave spring and cable work to a trained technician. The torsion springs above the door store enough energy to cause serious injury if they release unexpectedly, and no panel job is worth a risk to your hands or your back.
Why Florissant Homeowners Call Us for Panel Work
Garage doors are all we do. That focus means every call, every technician, and every part we recommend is oriented around one system, not spread across a dozen unrelated home services. Our technicians have up to 9 years of experience, and we’re fluent in the hardware that’s already on your door, from a LiftMaster opener to a Clopay panel you bought years ago. Spring repair is a named specialty for us because it’s the highest-risk job on any garage door, and we treat it that way. Whether it’s a repair or a full replacement, we’ll tell you which one you actually need.
FAQs – Panel Replacement Cost
How much does a single garage door panel cost in Florissant?
A single panel typically runs $250 – $500, with a bottom steel section often landing near $250 – $340. The final price depends on material, size, and whether a match is needed. Call (844) 943-4245 for an exact quote; estimates are free.
Is it cheaper to repair or replace a garage door panel?
Repairing one panel is almost always cheaper than replacing the whole door: a panel job is $250 – $500 versus $700 – $2,200 for a full new door. If three or more panels are damaged or the door is old, replacement can pencil out better. We’ll compare both numbers for you, so call (844) 943-4245.
Can you come today for a panel replacement?
Same-day visits are often possible for a single panel, and emergency service is available when a stuck or broken door is a security or safety problem. Call (844) 943-4245 early and we’ll tell you the soonest window; our dispatch runs from 7am to 7pm.
Will a new panel match my existing garage door color?
Usually yes, since we work on Clopay, Amarr, Wayne Dalton, Raynor, Craftsman, and other major panels. Exact matches can be harder on older doors. We’ll show you a sample card so you can decide between a close match and a full repaint. Call (844) 943-4245 to talk through options.
Do you need a permit to replace a garage door panel in Florissant?
Single-panel cosmetic replacements usually don’t require a permit, but a full door replacement or structural change may. Rules can vary by city, so confirm with Florissant’s building department before you start. We can walk you through what the job involves; call (844) 943-4245 to schedule a free estimate.
Get a Free Panel Replacement Estimate
If your garage door has a dented, rusted, or water-damaged panel, don’t wait for the damage to spread. Call (844) 943-4245 for a free estimate, and we’ll look at the whole door, tell you whether a panel swap or a full replacement makes more sense, and give you a written price with no surprises. Fast dispatch from 7am to 7pm, same-day service when the situation calls for it, and a job that leaves your door back in working order the same visit.
Pricing reflects the Florissant market as of 2026. Garage Door Repair Florissant offers free estimates – call (844) 943-4245.
What Our Customers Say
"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Rohan Gupta"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Daniel Hayes"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Neil Sullivan