Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Ferguson?
Garage door work in Ferguson typically runs $150 – $600 for a repair, with a single broken spring at $180 – $340 and a full new door installation at $700 – $2,200. Most of the calls we take here land closer to the middle of that repair range, because a snapped spring or a door that’s jumped its track is far more common than a full replacement. The written estimate we give you after looking at the door is the price that sets the final number.
We’re a garage door specialist and nothing else. That focus matters when you’re trying to figure out whether a quote is fair: every call, every technician, and every part is oriented around one system. Our technicians have up to 9 years of experience, and we work on the brand already in your garage, whether that’s LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, or Raynor.
Key Takeaways
- Typical Ferguson garage door repair: $150 – $600.
- One spring: $180 – $340. A matched pair, which is usually replaced together, costs about twice that.
- New opener installation: $250 – $550. New door installation: $700 – $2,200.
- Estimates are free, and we’ll tell you whether a repair or a replacement actually makes sense.
Garage Door Cost Breakdown (2026)
The table below shows the estimated ranges we see for each job type in Ferguson. These are typical numbers for the area, not a fixed menu. The written estimate you get after we’ve looked at the door is the price.
| Job | Typical Estimated Range |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Spring repair (matched pair) | About twice the single-spring range |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
What pushes a job toward the top of a range and what pulls it down comes down to a few practical things. A single spring repair sits at the lower end; a pair, which most doors need once one goes, roughly doubles that line. A door that only needs rollers or a realignment stays inexpensive because the parts are simple and the labor is short. A tweaked panel on an older door can cost more than expected if the panel profile is discontinued, since the replacement has to be sourced rather than pulled from stock. And a new door installation swings widely across its $700 – $2,200 range based on size, material, and whether the existing opener and hardware carry over.
If you’re comparing a repair quote to a replacement quote, it helps to know that a repair that keeps a sound door working will almost always be the cheaper path in the near term. Replacement starts to make sense when the door itself is failing in several places at once, not when one part has let go.
What Affects Garage Door Pricing in Ferguson
Pricing here isn’t just about the part. A handful of local and structural factors move the number up or down:
- Your door’s age and hardware. Ferguson has a lot of older housing stock, and garages built decades ago often carry original tracks, rollers, and openers. Older hardware sometimes means more than one part needs attention in the same visit, which pushes a job higher in the range. It also means we’re often working on a brand the homeowner didn’t choose, which is exactly why we service all eight major brands rather than a handful.
- Spring type and count. A torsion spring setup and a pair of extension springs are different jobs with different labor. One spring is $180 – $340; a matched pair, usually replaced together so the door stays balanced, runs about twice that.
- Whether it’s an emergency call. A door stuck open overnight or a vehicle locked in creates a real security and access problem. Emergency service is available for those situations, and time-sensitive work is priced accordingly.
- Door size and material for installations. A single-car door in a lightweight material sits near the bottom of the $700 – $2,200 installation range. A wider double door in a heavier, insulated material sits near the top, and the opener may need to be sized to match.
- Opener condition and brand. If the opener is the problem, an opener repair at $120 – $320 is far cheaper than a new unit at $250 – $550. Whether repair or replacement is the right call depends on the unit’s condition and whether parts are still available for it. We work on LiftMaster, Chamberlain, Genie, and Craftsman units regularly, so we can usually tell you quickly which way to go.
- Access and clearance. A garage packed tight with storage, a low-clearance ceiling, or a door that opens onto a sloped Ferguson driveway can add labor time. None of this is unusual, but it’s the kind of thing that’s easier to see in person than to guess at over the phone.
How to Save on Garage Door Work in Ferguson
The biggest savings come from catching a problem before it becomes two problems. A door that’s started to close unevenly is usually telling you a cable or spring is on its way out. Getting that looked at while it’s a single repair keeps you at the low end of the range instead of paying for a spring and a cable and a realignment in one visit.
A few practical things that help:
- Get a written estimate before any work starts. You should know the number before a technician touches the door. Ours are free.
- Ask whether repair or replacement is the honest answer. We’ll tell you which one you actually need rather than defaulting to the bigger job. Sometimes a $120 track realignment solves what looks like a much bigger failure.
- Don’t ignore a slow, noisy, or jerky door. Rollers and tracks wear gradually. Replacing rollers at $110 – $220 is cheaper than the panel and track damage a neglected door can cause.
- Keep the door balanced and lubricated. A door that’s been kept in adjustment puts less strain on the opener, which stretches the life of a unit you’d otherwise be replacing at $250 – $550.
- Ask about the opener before buying a new one. A remote that’s stopped working or a unit that reverses for no clear reason is often a repair, not a replacement. It’s worth a diagnostic call before you spend on a new unit.
One thing we won’t do is talk you into a full door when a repair will do. Garage doors are all we do, so we’d rather solve the actual problem and have you call us again when something else needs attention. Call (844) 943-4245 for a free estimate and we’ll talk through the options.
Springs and cables are the one part of this trade where we’d ask you to step back. A torsion spring under tension can cause serious injury if it’s handled without the right tools and technique. We don’t recommend adjusting or removing springs or cables yourself, even on a door that looks simple. That’s a job for a trained technician, and it’s a big part of why we treat spring repair as a specialty rather than an add-on.
Should You Repair or Replace Your Garage Door?
Most Ferguson homeowners should repair, not replace. If the door’s panels are structurally sound and only the springs, cables, rollers, or opener have failed, a repair in the $150 – $600 range gets you back in working order without the cost of a new door. Replacement at $700 – $2,200 is the right call when the door itself is the problem: cracked or rotted panels across the door, a frame that’s out of square, or a door so old that replacement parts for it can’t be found.
We’ll tell you which one you actually need. If you want a second opinion on a quote you’ve been given elsewhere, or you just want to know what a repair would cost, we’re glad to take a look. For a broader view of what we handle across the area, see our garage door repair Florissant page.
FAQs – Garage Door Cost in Ferguson
How much does a garage door repair cost in Ferguson?
Most garage door repairs in Ferguson run $150 – $600. The exact figure depends on what’s failed: a single spring is $180 – $340, a cable repair is $130 – $250, and a track realignment is $120 – $240. Call (844) 943-4245 for an exact quote – estimates are free.
How much does it cost to replace a garage door spring in Ferguson?
One spring is $180 – $340. Most doors use a matched pair, and because the pair is usually replaced together to keep the door balanced, expect roughly twice that range for the pair. Call (844) 943-4245 and we’ll confirm which setup your door has.
Is it cheaper to repair my garage door or replace it?
Repair is almost always cheaper when the door panels are sound: $150 – $600 versus $700 – $2,200 for a new door. Replacement makes more sense when the door itself is failing in several places. Call (844) 943-4245 and we’ll give you a straight answer.
How much does a new garage door opener cost in Ferguson?
Opener installation runs $250 – $550, and an opener repair runs $120 – $320. Repair is the cheaper path when the existing unit can be fixed, which is often the case with the LiftMaster, Chamberlain, Genie, and Craftsman units we see most. Call (844) 943-4245 to find out which applies to yours.
Can you come out the same day for a broken garage door in Ferguson?
Yes, same-day service is available for urgent failures, and emergency service is offered when a stuck or broken door creates a real security or access problem. Call (844) 943-4245 and we’ll get you on the schedule – estimates are free.
Pricing reflects the Ferguson market as of 2026. Garage Door Repair Florissant offers free estimates – call (844) 943-4245.
What Our Customers Say
"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Rohan Gupta"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Daniel Hayes"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Neil Sullivan